Licensed Plumber in Orlando, FL  |  Since 2003

Slab Leak Detection & Repair

A leak under the concrete does its damage where you cannot see it. We locate the exact failure point before any concrete is opened — then repair or reroute the line, keeping the access as small as the job allows.

80,000+Repipes Completed Since 2003
Located FirstNo Concrete Opened on a Guess
DocumentedFor Insurance Where Applicable
24/7Emergency Response

What This Service Is

Leaks Beneath the Foundation

A slab leak is a failure in a water line running beneath a concrete foundation slab. Because the pipe is encased in or buried under concrete, the leak is invisible and often silent — it announces itself through a water bill, a warm patch of floor or a crack in the tile, by which point water has been running for weeks.

It is one of the most serious plumbing issues a property can face, precisely because it develops out of sight while causing progressive damage. Water weakens flooring, compromises structural stability and creates conditions for mould growth if not addressed quickly. In Central Florida, mineral-heavy water, shifting soil, high groundwater levels and aging piping all increase the risk of hidden under-slab failure.

Shamrock Plumbing provides slab leak detection and repair across Central Florida, using electronic leak detection, pressure testing and thermal diagnostics to locate the exact source before any structural access begins. Once identified, we perform targeted repair or rerouting designed to restore reliable flow with minimal disruption. With more than 80,000 repipes completed since 2003, our team delivers accurate diagnostics and permanent solutions that protect both the system and the structure.

Know the Warning Signs

Signs You May Have a Slab Leak

  • A sudden, unexplained increase in your water bill
  • Warm or damp spots on the floor
  • Cracked tile or flooring beginning to separate
  • Water pooling with no visible source
  • The sound of running water beneath the slab
  • Moisture or mould appearing near baseboards

Professional detection is required to confirm the exact location before any repair begins — these signs tell you there is a problem, not where it is.

We Do Not Break Concrete on a Guess

This is the part that matters most on a slab leak. Opening the wrong section of floor costs you the excavation, the repair and the reinstatement — and you still have the leak.

We confirm the failure point with electronic detection, pressure testing and thermal imaging, then map the slab to define the smallest viable access. Documentation is available for insurance purposes where applicable.

Call 24/7: (407) 326-3056

Why Slabs Fail Here

Central Florida Conditions

Properties built on slab foundations rely on concealed water lines beneath the concrete. When those lines corrode, crack or shift, hidden leaks compromise structural stability over time — and local conditions accelerate every part of that.

Mineral-Heavy Water

Central Florida's hard water drives internal corrosion, thinning pipe walls from the inside where nobody can inspect them.

Soil Movement

Shifting and settlement place mechanical stress on rigid pipe runs, working joints loose and cracking lines over years.

High Groundwater

Persistent subsurface moisture accelerates external corrosion and makes leaks harder to spot, since the ground is damp anyway.

Aging Materials

Older copper and outdated piping installed decades ago is now well into the period where failure is expected rather than unlucky.

Year-Round Use

Continuous system use without a dormant season means Florida plumbing accumulates wear faster than in colder climates.

Compounding Effect

These rarely act alone. Corroded pipe under mechanical stress in damp ground fails sooner than any one factor predicts.

The Shamrock Process

Diagnosis Before Access

1. Detect

Electronic leak detection and acoustic listening establish that a leak exists and roughly where beneath the slab it sits.

2. Confirm

Pressure testing isolates the affected line; thermal imaging is used where the situation calls for it.

3. Map

We map the slab to define the smallest access point that reaches the failure — before any concrete is touched.

4. Repair

Targeted repair, sectional replacement or rerouting, completed to code and verified before reinstatement.

Four Routes

Repair Methods and Rerouting

The right approach depends on the condition and location of the piping. There is no single correct answer, and we scope it once the leak is confirmed.

  • Targeted spot repair through controlled slab access
  • Sectional pipe repair beneath the slab
  • Full line replacement where deterioration is widespread
  • Pipe rerouting to bypass compromised lines entirely

When Rerouting Beats Repairing

If several areas show corrosion or long-term wear, fixing one spot buys you months before the next failure elsewhere in the same tired run. Rerouting bypasses the compromised line altogether — often above the slab — so there is nothing left under the concrete to fail again.

Where the whole system is at that stage, whole house repiping is usually the better economics than a sequence of slab repairs.

What Is Actually at Risk

Why Waiting Costs More

Unresolved slab leaks lead to foundation instability, flooring damage, mould growth and structural repairs that dwarf the plumbing work. Early detection and professional repair preserve long-term property integrity — and the gap between the two bills is usually an order of magnitude.

  • Foundation stability and the slab itself
  • Flooring, tile and subfloor systems
  • Framing, baseboards and adjoining finishes
  • Indoor air quality, through mould prevention
  • Water efficiency and monthly utility cost

Slab Leak Repair Across Central Florida

Areas We Serve

From our Orlando headquarters on Old Winter Garden Road, Shamrock provides slab leak detection and repair throughout Orange and Seminole Counties.

Licensed. Warranty-Backed. Financing Available.

Suspect a Slab Leak? Do Not Wait

Every week a slab leak runs, the repair gets larger and the damage spreads further from the pipe. Detection is fast, non-destructive, and tells you exactly what you are dealing with.

Areas We Serve

With more than 80,000 repipes completed in Orlando and across Central Florida, Shamrock Plumbing is one of the region’s most experienced repiping specialists. Our commitment to quality workmanship and customer satisfaction has also earned us recognition as a 6-time Angi Super Service Award winner.

Explore the areas we serve below to find plumbing services in your community.

YOUR SLAB LEAK REPAIR QUESTIONS ANSWERED

A slab leak occurs when a water line beneath a concrete foundation develops a leak. Because it is hidden under the slab, it can go undetected while causing structural damage, weakening flooring, and increasing the risk of mold growth over time.

Common signs include unexplained increases in water bills, warm or damp spots on floors, cracked tiles, water pooling without a visible source, and the sound of running water beneath the slab. Moisture near baseboards can also indicate a hidden leak.

Licensed plumbers use advanced tools such as electronic leak detection, pressure testing, and thermal imaging to locate the exact source of the leak without unnecessary damage to the structure.

Not always. Concrete is only accessed after the exact leak location is confirmed. In some cases, pipe rerouting can be used to bypass the damaged section without extensive slab removal.

The timeline depends on the severity of the leak and the repair method. Targeted repairs may be completed quickly, while more complex rerouting or system replacement may take longer to ensure proper restoration.

Get Fast, Professional Plumbing Service From Licensed Experts

Our licensed plumbing professionals provide emergency response, leak detection, sewer replacement, water heater service, drain and sewer cleaning, repiping, and complete plumbing system repairs across Orlando and Central Florida. Submit your request and a member of our local team will contact you promptly to schedule service.. If you're experiencing a plumbing emergency, we're here to help 24/7. Call (407) 326-3056 now for immediate assistance.